The following table describes the features of the PowerCam 100.
Table 1-3: PowerCam 100 Features
Feature
Field of view
Pan range
Tilt range
Horizontal resolution
Zoom range
Minimum illumination
Automatic focus
Supported on optional
tripod
Video
Type
As explained in Installing the PowerCam 100, you plug the
PowerCam 100 camera into the top connector on the video board on
the back of the electronics module. This connector supports PTZ
features.
Auxiliary Camera
Auxiliary cameras can be used to show additional views of a
meeting room or scenes outside of the meeting room that the main
camera cannot capture. The pan-tilt-zoom style camera, which has
the same features as the PowerCam 100, is usually mounted on a
tripod.
Description
66 degrees
+/Ð
o
100
o
o
+ 15
- 30
Minimum 420 lines
10x
7 lux
6 inch (minimum) to inÞnity
Mounts on a tripod that supports at
least 20 kilograms (9 pounds)
Supports NTSC and PAL video
standards
1/3-inch color Charge Couple
Device (CCD)
Cameras
1-13