Loopback Tests
Running the Remote CSU Loopback Test
The remote CSU loopback test is run while a call is in progress. This
test directs the near-end signal through the near-end CSU and sends
it over the telephone lines to the far-end CSU. The signal then loops
through the far-end CSU and back through the telephone lines to the
near-end CSU.
The following Þgure illustrates how the remote CSU test runs.
Near-end site
Far-end site
Network
Codec
Codec
Electronics module
Electronics module
Figure 4-8: Remote CSU Loopback Test
4-37