Set Up The Camera With Two Monitors Or A Projector - PictureTel 970 Installation Manual

Set Up the Camera with Two Monitors or a Projector

• If you have a dual-monitor system, you must place the camera on top of the NTSC/PAL monitor (not on the
SVGA/XGA monitor), and if the NTSC/PAL monitor is on a cart, you must place the computer box in that cart.
Once you've placed the camera and computer box, you can connect the camera and audio cables as
described on the previous pages (refer to the page that corresponds to your system's configuration).
See the PictureTel 900 Series Collaboration System Administrator's Guide for complete information about
connecting the cables in a dual-monitor system.
• If you have a projector, see the documentation that you received with the projector for information about
connecting the cables.
20