Cnc Interface System - Allen-Bradley 1394 User Manual

ODS Software
1746 I/O
Fiber Optic Ring
Fiber Optic Ring
Operator Panel
PLC
MTB Panel

CNC Interface System

The 1394 9/Series CNC Interface system (1394-SJTxx-E) provides a
digital servo system to be used with the 9/260 and 9/290 CNC. This
system provides all power electronics and uses a cost-saving digital
interface approach. Servo control for this system is handled by the 9/
Series CNC. A fiber optic I/O ring is provided to the 1394 and the
system is completely interfaced with and programmed using ODS
(Off-Line Development System) and the CNC operator panel. Allen-
Bradley Remote I/O, MMS/Ethernet (9/260 and 9/290 only), and
Data Highway Plus™ (9/260 and 9/290 only) communications are
available options with the 9/Series CNC interface system.
Figure 1.3
CNC Interface System
9/230, 9/260, or
9/290 CNC
Fiber Optic Ring
RIO
R
Fiber Optic Ring
Overview
1394
1326AB Motors
Publication 1394-5.0 — May 2000
1-5