Understanding Him Keys - Allen-Bradley 1394 User Manual

C-2 Using the Human Interface Module (HIM)
Publication 1394-5.0 — May 2000
Figure C.1
HIM Mounted on 1394 Analog Servo System
Allen-Bradley
1394 Digital Servo Controller
System Module
There are two SCANports located on the 1394 analog servo board.
Port 1 is located at the top of the analog servo board and port 2 is
located at the bottom of the analog servo board.
When you are using the HIM:
In the HIM cradle
As a hand-held device

Understanding HIM Keys

The following diagram shows the HIM front panel.
Figure C.2
HIM Front Panel
Use port:
1
2