Configuring Your 1394 Analog Servo System; Chapter Objectives; Where To Look For Other Programming Information - Allen-Bradley 1394 User Manual

Chapter Objectives

Where to Look for Other
Programming Information
Configuring Your 1394 Analog Servo
System
This chapter covers the following topics:
•

Where to look for other programming information.

• Conventions used in this chapter.
• Understanding Analog Servo System parameters.
• 1394 Analog Servo software diagram
Because GML and the HIM provide auto tune and setup features, the
information in this chapter is intended only a supplement to help you to
understand the technical approach and to assist you with using
communication tools, such as SCANport.
System configuration information for other 1394 systems are given in the
table below.
For: Refer to:
GMC or GMC Turbo system GML Programming Manual (publication 999-104).
configuration
CNC Interface or 9/Series CNC AMP Reference Manual (publication 8520-ARM2).
9/440 system configuration
1394 SERCOS system ControlLogix Motion Module Setup and Configuration Manual
modules (publication 1756-UM006A-EN-P).
8
Chapter
Publication 1394-5.0 — May 2000