Table of Contents
Advertisement
6
Hang up the handset.
Sending/receiving using ECM
This machine is set to send/receive faxes in ECM (Error Correction Mode). Checking the sending
and receiving condition at the sending end and the receiving end respectively, ECM automatically
corrects errors caused by telephone line trouble.
NOTE
• If the sender's or receiver's fax is not ECM-compatible, the fax will be sent/received in the standard mode.
• You can also disable ECM sending/receiving. (See page 170, page 171.)
Chapter 8
Sending Faxes
103
Advertisement
Table of Contents
