Table of Contents
Advertisement
Menu: RX SETTINGS
Name
ECM RX
FAX/TEL AUTO SW
RING START TIME Selects the time the machine takes to check
F/T RING TIME
F/T SWITCH
ACTION
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
F/T RING TIME
REMOTE RX
REMOTE RX ID
RX REDUCTION
SELECT REDUCE
DIR
RX START SPEED
RX REPORT
*
1
<NET SWITCH> is only available in Australia and New Zealand.
*
New Zealand : 1 to 5TIMES.
2
Chapter 15
Description
Enables/disables Error Correction Mode (ECM)
during reception.
If you select <FAX/TEL AUTO SW> as the
receive mode, customizes its settings.
whether a call is a fax or voice call.
Selects the ring length for voice calls.
Selects whether the machine switches to receive
mode after the ring time has elapsed, or whether it
disconnects the call.
If you select <FAX ONLY MODE>, <NET
*
1
or <FAX/TEL AUTO SW> as the
SWITCH>
receive mode, enables/disables ringing for fax
calls. (A telephone must be connected to your
machine for ringing to occur.)
If you select <ON>, selects the number of rings for
fax calls.
If you select <MANUAL MODE> as the receive
mode, selects whether the machine switches to fax
receive mode after ringing for a specified length of
time.
If you select <ON>, selects the length of time the
machine rings before switching to fax receive
mode.
Enables/disables remote receiving.
If you select <ON>, selects the remote receiving
ID.
Enables/disables automatic reduction of faxes to
fit the paper loaded.
Selects the direction of the reduction.
Selects the speed at which the machine starts
receiving.
Enables/disables automatic printing of a reception
report after receiving.
Settings
ON
OFF
—
0 to 30SEC (8SEC)
10 to 60SEC
(22SEC)
RECEIVE
DISCONNECT
OFF
ON
*
2
1 to 99TIMES
(2TIMES)
OFF
ON
5 to 99SEC
(15SEC)
ON
OFF
00 to 99
(25)
ON
OFF
VERTICAL ONLY
HORIZ & VERTICAL
33600bps
14400bps
9600bps
7200bps
4800bps
2400bps
OUTPUT NO
PRINT ERROR ONLY
OUTPUT YES
Appendix
Details
page 103
—
—
—
—
—
—
—
171
Advertisement
Table of Contents
