Sending A Fax; Sending/Receiving Faxes Via The Remote Fax Server; Settings Required To Send Faxes Via The Remote Fax Server; Setting The Server - Canon imageRUNNER ADVANCE C2020 Setup Manual

Sending a Fax

Send a fax to the destination registered in "Storing New
Destinations, " on p. 33.

Place your originals.

Press [Address Book].

Select [central sales dept.].

Press (Start).
If the [Original Size] screen is displayed, specify the size of the
original → press [OK].
5
Press [Start Sending].
The fax is sent.
Sending/Receiving Faxes
via the Remote Fax
Server
By using the Remote Fax function on your
machine, you can send/receive faxes using a server
machine.
For the purposes of this example, the machine
(another imageRUNNER ADVANCE series machine)
that forwards the fax is called the "server, " and the
machine (this machine) from/to which the fax is
sent is called the "client. "
The flow of operations is indicated below.
Sending a Fax via the Remote Fax Server
. Settings Required to Send Faxes via the Remote Fax
Server
•

Setting the Server

• Setting the Client
. Sending Faxes Using the Remote Fax Server
Receiving a Fax via the Remote Fax Server
. Settings Required to Receive a Fax via the Remote Fax
Server
• Setting the Server
• Setting the Client
Settings Required to Send
Faxes via the Remote Fax
Server
To send a remote fax, it is necessary to specify the following
settings.
Server Settings
[Use Remote Fax]
On
Client Settings
[Remote Fax TX Settings]
[IP Address]: 9.68.. (IP address of the server)
Setting the Server
To use another imageRUNNER ADVANCE series machine with
a fax board as a server, you must specify the Remote Fax TX
settings on that machine.
For more information, see the instruction manuals for the
other imageRUNNER ADVANCE series machine.
2
5