Table of Contents
Advertisement
4. To relocate this equipment, please follow this procedure.
1) Disconnect the equipment from the Telecom connection.
2) Disconnect the equipment from the power source.
3) Reconnect the equipment to the power source.
4) Reconnect the equipment to the Telecom connection.
5. If the supply cord of this equipment is damaged, it must be replaced by an approved Canon part.
Please contact your local authorized Canon dealer or the Canon help line.
6. Not all standard telephones will respond to incoming ringing when connected to the extension
socket.
7. This device may be subject to bell tinkle, or mistakenly enter receive mode when calls are made
from another device on the same line. If this occurs, the problem should not be referred to the
Telecom Faults service.
8. Please note when you connect an extension phone to this equipment, if you use an extension
phone which has features such as "last number redial," redial memory numbers may be lost.
21
Advertisement
Table of Contents
