Table of Contents
Advertisement
Chapter
9
FAX
Receiving Faxes
Flow of receiving faxes
The operation flow of receiving faxes is as follows:
Load paper in the multi-purpose tray. (See page 40.)
Select the receive mode.
If you want to receive only faxes automatically with your machine, or
you have a dedicated telephone line for fax use only:
<FAX ONLY MODE> (See page 105.)
If you have subscribed to the Telstra FaxStream
(Australia only) or the Telecom FaxAbility service (New Zealand
only):
<NET SWITCH> (See page 105.)
If you receive mainly voice calls and sometimes faxes, or you want to
receive faxes manually:
<MANUAL MODE> (See page 106.)
If you want to receive voice messages on your answering machine and
receive faxes automatically:
<ANS.MACHINE MODE> (See page 107.)
If you want to receive faxes automatically as well as voice calls:
<FAX/TEL AUTO SW> (See page 107.)
NOTE
• You have to connect a telephone to the external device jack when you set <MANUAL MODE>, <FAX/TEL
AUTO SW> or <NET SWITCH>.
• You have to connect an answering machine to the external device jack when you set <ANS.MACHINE
MODE>.
104
Receiving Faxes
Step 1
Step 2
Duet service
TM
Chapter 9
Advertisement
Table of Contents
