JCM GLOBAL DBV Series Integration Manual page 42

Normal Performance
Operation Test
LED LED
Sequence Sequence
Yellow Green
(3) (4)
Yellow Green
(3) (5)
Yellow Green
(3) (6)
P/N 960-000175R_Rev. A {EDP #233426}
®
DBV Series Banknote Validator (DBV-400) Integration Guide
Table 23 LED Flash Reject Codes (Continued)
Error
Sensors detected an incorrect set specification value.
Fraud Detection [Solution] Check the DBV-400 Unit's conditions. Check that the Banknote is
not damaged nor exhibiting unfit conditions. Refer to "Banknote Fitness
Requirements" on page 4 for unacceptable Banknote types.
The Banknote Accept/Inhibit Setting was made by a Command from the
Host Machine.
Inhibit Setting [Solution] Check that the Commands from the Host Machine are correct,
and change its setting to be acceptable for use with the Unit.
Abnormal
DIP Switch settings are incorrect.
[Solution] Check that the DIP Switch settings are properly set.
Return Command
A Banknote has been returned via a Return Command from the Host
Received Machine.
Causes and Solutions
© 2014, JAPAN CASH MACHINE CO., LTD.
3 4