Access Control - TP-Link Archer C20 User Manual

Chapter 4
Then you can go back to the
4. 9.
Access Control is used to deny or allow specific client devices to access your network
with access time and content restrictions.
I want to:
How can I
do that?
Downloaded from www.Manualslib.com
Parental Control

Access Control

Deny or allow specific client devices to access my network with
access tiem and content restrictions.
For example, If you want to restrict the Internet activities of host
with MAC address 00-11-22-33-44-AA on the LAN to access
www.tp-link.com only, please follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Access Control
1 ) Click
2 ) Select
unique description (e.g. host_1) for the host in the
Description
MAC Address
3 ) Click Save.
3. Go to
settings:
1 ) Click
2 ) Select
description (e.g. target_1) for the target in the
Description
full name or the keywords (for example TP-LINK) in the
Domain Name
manuals search engine
Settings page to check the following list.
> Host and configure the host settings:
Add New.
MAC Address as the mode type. Create a
field and enter 00-11-22-33-44-AA in the
filed.
Access Control > Target
Add New.
Domain Name as the mode type. Create a unique
field and enter the domain name, either the
field.
Host
and configure the target
Target
46