Wireless Statistics - TP-Link Archer C20 User Manual

Chapter 4
result in poor network performance because of excessive packets. 2346 is the default
setting and is recommended.
• DTIM Interval
Message (DTIM). A DTIM field is a countdown field informing clients of the next window
for listening to broadcast and multicast messages. When the router has buffered
broadcast or multicast messages for associated clients, it sends the next DTIM with
a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The
default value is 1, which indicates the DTIM Interval is the same as Beacon Interval.
• Enable WMM
being transmitted preferentially. It is strongly recommended to enable this function.
• Enable Short GI
data capacity by reducing the guard interval time.
• Enable AP Isolation
wireless stations cannot access each other through WLAN. This function will be
disabled if WDS / Bridge is enabled.
4. 3. 6.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
client device connected to the router.
• MAC Address
• Current Status
• Received Packets
• Sent Packets
• Configure
•
•
Downloaded from www.Manualslib.com
- This value determines the interval of the Delivery Traffic Indication
- WMM function can guarantee the packets with high-priority messages
- It is recommended to enable this function, for it will increase the
- This function isolates all connected wireless stations so that

Wireless Statistics

Wireless > Wireless Statistics
- The MAC address of the connected wireless client.
- The running status of the connected wireless client.
- Packets received by the wireless client.
- Packets sent by the wireless client.
- The button is used for loading the item to the Wireless MAC Filtering list.
Allow - If the Wireless MAC Filtering function is enabled, click this button to
allow the client to access your network.
Deny - If the Wireless MAC Filtering function is enabled, click this button to
deny the client to access your network.
manuals search engine
to check the data packets sent and received by each
31