Chapter 6
4
Select a service type from the drop-down list and the following four fields will be
auto-populated. Select
enter the information manually.
5
Specify the IP address(es) that this filtering rule will apply to.
6
Click Save.
6 3
Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router.
2 Go to
Advanced
Custom
when your desired service type is not listed, and
>
Security
>
Access Control
and enable
Access Control.
Network Security
25