TP-Link Archer C20 User Manual page 82

•
1 ) If you see the message
2 ) Clicking
•
1 ) If you see the message
2 ) Exit the wireless configuration tool (the TP-LINK Utility, for example).
3 ) Select and right click
4 ) Expand
5 ) Right click
6 ) Change
If you can find other wireless network except your own, please follow the steps below:
• Check the WLAN LED indicator on your wireless router/modem.
• Make sure your computer/device is still in the range of your router/modem. Move
closer if it is currently too far away.
If you can find your wireless network but fail to connect, please follow the steps below:
• Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN number when you connect to
Downloaded from www.Manualslib.com
On Windows 7
wireless function is disabled or blocked somehow.
Troubleshoot and windows might be able to fix the problem by itself.
On Windows XP
this is usually because windows configuration utility is disabled or you are
running another wireless configuration tool to connect the wireless.
My Computer
Computer Management window.
Services and Applications
Zero Configuration in the Services list on the right side.
Wireless Zero
Startup type to Automatic, click
is Started. And then click OK.
the wireless network for the first time. This PIN number is different from the
Wireless Password/Network Security Key. Usually you can only find it on the
label of your router.
manuals search engine
No connections are available, it is usually because the
Windows cannot configure this wireless
on Desktop, and select
> Services, and find and locate
Configuration, and then select Properties.
Start and make sure the Service status
connection,
Manage to open
Wireless
78