Local Management - TP-Link Archer C20 User Manual

Chapter 4
• Ignore Ping Packet From WAN Port
ping packet from the Internet cannot access the router.
• Forbid Ping Packet From LAN Port
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click Save.
4. Click
4. 7. 3.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
the router.
For example, if you want to allow PCs with specific MAC addresses to access the router's
web management page locally from inside the network, please follow the instructions
below:
1 ) Select
2 ) Enter the MAC address of each PC separately. The format of the MAC address
3 ) Click Add, and your PC's MAC address will also be listed.
4 ) Click Save.
Note:
If your PC is blocked but you want to access the router again, press and hold the
factory defaults.
Downloaded from www.Manualslib.com
Blocked DoS Host List to display the DoS host table by blocking.

Local Management

Security > Local Management, and you can block computers in LAN from accessing
Only the PCs listed can browse the built-in web pages to perform
Administrator tasks.
is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the listed
MAC addresses can use the password to browse the built-in web pages to
perform administrator tasks.
manuals search engine
- The default setting is disabled. If enabled, the
- The default setting is disabled. If enabled, the
Reset button to reset the router to the
43