Quick
Installation Guide
AC750 Wireless Dual Band Router
1. Connect the Hardware
1
Power off the modem,
and remove the backup
battery if any.
LAN
Power Off
INTERNET
Note: If your Internet comes via an Ethernet cable from the wall instead of any DSL/Cable/Satellite modems, please connect the Ethernet cable directly to the router's Internet port.
2. Configure the Router
1
Connect your computer to the router (Wired or Wireless).
Wired
Turn off the Wi-Fi on your computer and connect devices as shown below:
WPS/
Wireless
Internet
1
Reset
On/Off
2
Open a web browser on the computer and configure the router according to the following main clues.
a
Enter http://tplinkwifi.net in the address bar.
Alternatively, enter http://192.168.0.1 or
http://192.168.1.1.
http://tplinkwifi.net
c
For IPTV/ VOIP users, please choose your connection
type from Exstream, Unifi, Maxis or Custom and
proceed with Step
d
. For others, please choose
f
Normal and skip to Step
. If you do not know which
type to choose, please contact with your ISP.
Click Next to continue.
Quick Setup - Choose Working Mode
Normal
Exstream
Unifi
Maxis
Custom
Back
2
Connect the modem to the
Internet port on your router using
an Ethernet cable.
INTERNET
Power
2
Ethernet
3
4
USB
Power
On/Off
Ethernet cable
Type in your user name and password (admin/admin by
default) and click Login.
Note: If the login window does not appear, please refer to FAQ->Q1.
d
Here we take Unifi mode as an example. Choose LAN type
and enter the correct VLAN ID.
Click Next to continue.
Quick Setup - Unifi
LAN1: IPTV
LAN2: Internet
LAN3: Internet
LAN4: Internet
Next
Modem
Typical Connection
3
Power on the modem,
wait for 2 minutes and
then power on the router.
Power On
WPS/
Wireless
Internet
Reset
On/Off
Power
WPS/
Wireless
Internet
1
2
Ethernet
3
4
USB
Reset
On/Off
On/Off
Wireless
Connect wirelessly by using
the default network name
Or
(SSID) and password on the
product label printed on the
bottom of the router.
admin
admin
Login
VLAN ID : 600
VLAN ID : 500
VLAN ID : 500
VLAN ID : 500
Back
Next
INTERNET
WPS/
Wireless
Reset
On/Off
4
INTERNET
Power
1
2
Ethernet
3
4
USB
Power
On/Off
Power
Power On
b
The Quick Setup will pop up. Click Next to continue.
Quick Setup - Start
Run the Quick Setup to manually configure your Internet connection and wireless settings.
To continue, please click the Next button.
e
Enter the Username and Password provided by your ISP. These
fields are case-sensitive.
h
Click Next to skip to Step
Quick Setup - PPPoE
Username:
Password:
Confirm password:
Secondary Connection:
Disabled
Back
Internet
1
2
Ethernet
3
4
USB
Power
Power
On/Off
Check the following LED
lights to ensure the hardware
connection is correct.
Power
2.4G/5G
Internet
On
On
On
AC750 Wireless Dual Band Router
Wireless
Password
/PIN
SSID:TP-LINK_XXXX
SSID
SSID:TP-LINK_XXXX_5G
Next
.
Dynamic IP
Static IP (For Dual Access)
Next