Network; Wan - TP-Link Archer C20 User Manual

Chapter 4
•
•
•
•
•
•
•

WAN

on the
•
•
•
•
•
• Traffic Statistics
•
•
•
•
• System Up Time
reset.
Click
4. 2.
4. 2. 1.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
3. Configure the IP parameters of the LAN and click Save.
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Downloaded from www.Manualslib.com
Name (SSID) - The SSID of the router.
Mode - The current wireless working mode in use.
Channel Width - The current wireless channel width in use.
Channel - The current wireless channel in use.
MAC Address - The physical address of the router.
WDS Status - The status of WDS connection.
- This field displays the current settings of the WAN, and you can configure them

Network

> WAN page.
MAC Address - The physical address of the WAN port.
IP Address - The current WAN (Internet) IP Address. This field will be blank
or 0.0.0.0 if the IP Address is assigned dynamically and there is no Internet
connection.
Subnet Mask - The subnet mask associated with the WAN IP Address.
Default Gateway - The Gateway currently used is shown here. When you use
Dynamic IP as the Internet connection type, click
obtain new IP parameters dynamically from the ISP or release them.
DNS Server - The IP addresses of DNS (Domain Name System) server.
- The router's traffic statistics.
Received (Bytes) - Traffic in bytes received from the WAN port.
Received (Packets) - Traffic in packets received from the WAN port.
Sent (Bytes) - Traffic in bytes sent out from the WAN port.
Sent (Packets) - Traffic in packets sent out from the WAN port.
- The length of the time since the router was last powered on or
Refresh to get the latest status and settings of the router.
Network
WAN
Network > WAN.
manuals search engine
Renew or Release
Dynamic IP, and the router will
here to
14