TP-Link Archer C20 User Manual page 46

Chapter 4
• Packets Statistics Interval (5~60)
5 and 60 seconds from the drop-down list. The
indicates the time section of the packets statistics. The result of the statistics is used
for analysis by SYN Flood, UDP Flood and ICMP-Flood.
• DoS Protection
disable the DoS protection function. Only when it is enabled, will the flood filters be
enabled.
Note:
Dos Protection will take effect only when the Statistics in
• Enable ICMP-FLOOD Attack Filtering
• ICMP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current ICMP-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable UDP-FLOOD Filtering
• UDP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable TCP-SYN-FLOOD Attack Filtering
function.
• TCP-SYN-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
Downloaded from www.Manualslib.com
- Denial of Service protection. Select Enable or Disable to enable or
- Check the box to enable or disable this function.
manuals search engine
- The default value is 10. Select a value between
Packets Statistics Interval
System Tool > Statistics
-Check the box to enable or disable this function.
- The default value is 50. Enter a value
- The default value is 500. Enter a value
-Check the box to enable or disable this
- The default value is 50. Enter a value
value
is enabled.
42