Address Reservation; Forwarding - TP-Link Archer C20 User Manual

Chapter 4
• Client Name
• MAC Address
• Assigned IP
• Lease Time
expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and show the
current connected devices, click Refresh.
4. 5. 3.
You can reserve an IP address for a specific client. When you have specified a reserved
IP address for a PC on the LAN, this PC will always receive the same IP address each
time when it accesses the DHCP server.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
3. Click
1 ) Enter the MAC address (in XX-XX-XX-XX-XX-XX format) of the client for which
2 ) Enter the IP address (in dotted-decimal notation) which you want to reserve for
3 ) Leave the status as Enabled.
4 ) Click Save.
4. 6.
The router's NAT (Network Address Translation) feature makes the devices on the LAN
use the same public IP address to communicate in the Internet, which protects the
Downloaded from www.Manualslib.com
- The name of the DHCP client.
- The MAC address of the DHCP client.
- The IP address that the router has allocated to the DHCP client.
- The time of the DHCP client leased. After the dynamic IP address has

Address Reservation

DHCP > Address Reservation.
Add New and fill in the blanks.
you want to reserve an IP address.
the client.

Forwarding

manuals search engine
35