Table of Contents
Advertisement
Chapter 9
9 1
Protect the Network from Cyber Attacks
The SPI (Stateful Packet Inspection) Firewall protects the router from cyber attacks
and validate the traffic that is passing through the router based on the protocol. This
function is enabled by default.
1
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2
Go to
Advanced
9 2
Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2 Go to
Advanced
3 Toggle on to enable
4 Select the access mode to either block (recommended) or allow the device(s) in the
list.
To block specific device(s):
1 ) Select Blacklist.
2 ) Click
3 ) The
Operation Succeeded
selected devices have been successfully added to the blacklist.
>
Security
> Firewall. It's recommended to keep the default settings.
>
Security
>
Access
Access
Control.
and select devices you want to be blocked and Click ADD.
message will appear on the screen, which means the
Control.
Network Security
36
Advertisement
Table of Contents
