Arp List; Dynamic Dns - TP-Link Archer C20 User Manual

Chapter 4

4. 12. 2. ARP List

To manage a device, you can observe the device on the LAN by checking its MAC
address and IP address on the ARP list, and you can also configure the items. This page
displays the ARP list which shows all the existing IP & MAC Binding entries.
• MAC Address
• IP Address
• Status
• Configure
•
•
• Click
• Click
• Click
Note:
An item can not be loaded to the IP & MAC Binding list if the IP address of the item has been loaded before. Error warning
will prompt as well. Likewise,

4. 13. Dynamic DNS

The router offers the DDNS (Dynamic Domain Name System) feature, which allows the
hosting of a website, FTP server, or e-mail server with a fixed domain name (named by
yourself) and a dynamic IP address. Thus your friends can connect to your server by
entering your domain name no matter what your IP address is. Before using this feature,
you need to sign up for DDNS service providers such as www.comexe.cn,
www.dyndns.org, or www.noip.com. The Dynamic DNS client service provider will give
you a password or key.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
Comexe DDNS
If the dynamic DNS Service Provider you select is www.comexe.cn, the following page
will appear.
Downloaded from www.Manualslib.com
- The MAC address of the listed computer on the LAN.
- The assigned IP address of the listed computer on the LAN.
- Indicates whether or not the MAC and IP addresses are bound.
- Load or delete an item.
Load - Load the item to the IP & MAC Binding list.
Delete - Delete the item.
Bind All to bind all the current items.
Load All to load all items to the IP & MAC Binding list.
Refresh to refresh all items.
Load All only loads the items without interference to the IP & MAC Binding list.
Dynamic DNS.
manuals search engine
53