Dhcp; Dhcp Settings - TP-Link Archer C20 User Manual

Chapter 4
•
•
•
•
•
•
•
•
Note:
The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on the
Bandwidth Control
4. 5.
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
4. 5. 1.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
3. Specify DHCP server settings and click Save.
Downloaded from www.Manualslib.com
Guest Network Isolation
another.
Guest Network Bandwidth Control
Control rules will take effect.
Band Select - Select the 2.4 GHz or 5.0 GHz working wireless band for your
guests.
Guest Network - Enable or disable this function.
Network Name - Enter a value of up to 32 characters. The Network Name (SSID)
must be assigned to all wireless devices in your guest network.
Max Guests number - Maximum guests.(1-32)
Security - You can configure the security of the guest network.
Access Time - During this period the wireless devices can access the guest
network.
• Timeout - If the countdown timer hits zero, guest network will close.
• Schedule - During this time the wireless stations could not access the guest network.
> Control Settings

DHCP

DHCP Settings

DHCP > DHCP Settings.
manuals search engine
- If enabled, one guest can not communicate with
- If enabled, the Guest Network Bandwidth
page.
33