Wireless; Basic Settings - TP-Link Archer C20 User Manual

Chapter 4
• MAC Address
• IP Address
default - 192.168.0.254).
• Subnet Mask
255.255.255.0 is used as the subnet mask.
• IGMP Proxy
watch TV on IPTV-supported devices on the LAN .
Note:
• If you have changed the IP address, you must use the new IP address to log in.
• If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP
Server will be configured automatically, but the Virtual Server and DMZ Host will not take effect until they
are re-configured.
4. 3.
4. 3. 1.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
3. Configure the basic settings for the wireless network and click Save.
Downloaded from www.Manualslib.com
- The physical address of the LAN ports. The value can not be changed.
- Enter the IP address in dotted-decimal notation of your router (factory
- An address code that determines the size of the network. Normally
- The Internet Group Management Protocol (IGMP) feature allow you to

Wireless

Basic Settings

Wireless > Wireless Settings.
manuals search engine
23