TP-Link Archer C20 User Manual page 32

Chapter 4
• Disable Security
disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal
shared passphrase.
•
•
•
•
• WPA /WPA2-Enterprise
•
•
•
•
•
•
• WEP
•
•
•
•
•
•
Downloaded from www.Manualslib.com
- The wireless security function can be enabled or disabled. If
- It's the WPA/WPA2 authentication type based on pre-
Version - Select Automatic,
Encryption - Select Automatic,
Wireless Password - Enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
- It's based on Radius Server.
Version - Select Automatic,
Encryption - Select Automatic,
Radius Server IP - Enter the IP address of the Radius server.
Radius Port - Enter the port that Radius server used.
Radius Password - Enter the password for the Radius server.
Group Key Update Period
The value should be 30 or above. Enter 0 to disable the update.
- It is based on the IEEE 802.11 standard.
Type - The default setting is Automatic, which can select Shared Key or Open
System authentication type automatically based on the wireless client's
capability and request.
WEP Key Format - Hexadecimal and ASCII formats are provided here.
Hexadecimal format stands for any combination of hexadecimal digits (0-9,
a-f, A-F) in the specified length. ASCII format stands for any combination of
keyboard characters in the specified length.
WEP Key (Password) - Select which of the four keys will be used and enter the
matching WEP key. Make sure these values are identical on all wireless clients
in your network.
Key Type - Select the WEP key length (64-bit, 128-bit or 152-bit) for encryption.
Disabled means this WEP key entry is invalid.
64-bit - Enter 10 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 5 ASCII characters.
128-bit - Enter 26 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 13 ASCII characters.
manuals search engine
WPA-PSK or WPA2-PSK.
TKIP or AES.
- Specify the group key update interval in seconds.
WPA or WPA2.
TKIP or AES.
- Specify the group key update interval in seconds.
28