TP-Link Archer C20 Quick Installation Manual

Quick Installation Guide
Wireless Dual-Band Router
Archer C20
Access Point Mode
In this mode, Archer C20 transforms your existing wired network
to a wireless one.
Connect the power adapter to the Archer C20 router and
power it on .
Connect the Archer C20's WAN port to your wired router's
Ethernet port via an Ethernet cable as shown above.
Connect a computer to Archer C20 via an Ethernet cable
or wirelessly by using the SSID (network name) and
Wireless Password of Archer C20
.
Range Extender Mode
In this mode, Archer C20 boosts the existing wireless coverage in your home.
1. Configure
Place Archer C20 next to your host router and power it on.
B Connect a computer to Archer C20 via an Ethernet cable or
wirelessly by using the SSID (network name) and
Password of the router.
C Launch a web browser, and enter http://tplinkwifi.net in
the address bar. Use the default password to log in.
Run the Quick Setup, select Range Extender and follow
the step-by-step instructions to set up the internet .
connection.
Power adapter
POWER
Wi-Fi
POWER RESET
/WPS
Launch a web browser, and enter http://tplinkwifi.net in
the address bar. Use the default password to log in.
Note: If the login window does not appear, please refer to FAQ > Q1.
http://tplinkwifi.net
Password
Log In
2. Relocate
Place Archer C20 about halfway between your host
router and the Wi-Fi "dead" zone. The location you choose
must be within the range of your existing host network.
Host Network Extended Network
Host Router Archer C20 Router
WAN
WAN 1 2 3 4
Archer C20 Router
Run the Quick Setup, select Access Point and follow
the step-by-step instructions to set up the internet
connection.
Button Explanation
BUTTON
WPS/Wi-Fi
Reset
Tether App
TP-Link Tether app provides a simple, intuitive
Devices
way to access and manage your router. Scan the
QR code to download Tether from the Apple App
Store or Google Play.
WAN Ethernet1Ethernet2 Ethernet3 Ethernet4
Ethernet
Internet Ethernet4
Wired Router
DESCRIPTION
Press and hold for 1 second to enable the WPS function.
Press and hold for about 5 seconds to turn on or off the
wireless function of the router.
Press and hold this button until all LEDs turn off to reset
the router to its factory default settings.