Chapter 4
Done!
4. 3. 5.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
•
Transmit Power
router.
•
Beacon Interval
here. Beacon Interval value determines the time interval of the beacons. The beacons
are the packets sent by the router to synchronize a wireless network. The default
value is 100.
•
RTS Threshold
packet is larger than the specified RTS Threshold size, the router will send RTS frames
to a particular receiving station and negotiate the sending of a data frame. The default
value is 2346.
•
Fragmentation Threshold
packets will be fragmented. Setting a low value for the Fragmentation Threshold may
Downloaded from
www.Manualslib.com
Now only client A and client B can access your network.
Wireless Advanced
Wireless
>
Wireless
Advanced.
- Select High,
High
is the default setting and recommended.
- Enter a value between 40-1000 milliseconds for Beacon Interval
- Here you can specify the RTS (Request to Send) Threshold. If the
- This value is the maximum size determining whether
manuals search engine
Middle
or
Low
which you would like to specify for the
30