TP-Link Archer C20 User Manual page 28

Ac750 wireless dual band router
Hide thumbs Also See for Archer C20:
Table of Contents

Advertisement

Chapter 4
Wireless Network Name
TP-LINK_XXXX (XXXX indicates the last unique four numbers of each router's MAC
address). It is strongly recommended that you change your network name (SSID). This
value is case-sensitive. For example, TEST is NOT the same as test.
Mode
default setting
the router.
Note:
If 11bg mixed mode is selected, the
changed.
Channel Width
is Auto, which can automatically adjust the channel width for your clients.
Channel
channel is set to Auto. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
Enable Wireless Router Radio
disabled to allow or deny wireless access. If enabled, the wireless clients will be able
to access the router.
Enable SSID Broadcast
name (SSID).
Enable WDS Bridging
the router can bridge two or more WLANs.
Note:
If this checkbox is selected, you had better make sure the following settings are correct.
SSID (to be bridged)
You can also use the survey function to select the SSID to join.
BSSID (to be bridged)
client. You can also use the survey function to select the BSSID to join.
Survey
WDS Mode
to change the WDS mode unless you notice network communication problems with
Downloaded from
www.Manualslib.com
- Enter a string of up to 32 characters. The default SSID is
- Select the desired mode. It is strongly recommended that you keep the
11bgn
mixed, so that all 802.11b/g/n wireless devices can connect to
Channel Width
- Select any channel width from the drop-down list. The default setting
- This field determines which operating frequency will be used. The default
- If enabled, the router will broadcast the wireless network
- You can select this to enable WDS Bridging, with this function,
- The SSID of the AP your router is going to connect to as a client.
- The BSSID of the AP your router is going to connect to as a
- Click this button, you can search the AP which runs currently.
- This field determines which WDS Mode will be used. It is not necessary
manuals search engine
field will turn grey and the value will become 20M, and cannot be
- The wireless radio of the router can be enabled or
24

Advertisement

Table of Contents
loading

Table of Contents