TP-Link Archer C20 User Manual page 77

Ac750 wireless dual band router

Hide thumbs Also See for Archer C20:

Table of Contents

4 ) Go to

• Use another web browser or computer to log in again.

• Reset the router to factory default settings and try again. If the login still fails, please

contact the technical support.

Note: You'll need to reconfigure the router to surf the Internet once the router is reset.

Q4. How to use the WDS Bridging function to extend my wireless

network?

For

example, my house covers a large area. The wireless coverage of the router I'm

using (the root router) is limited. I want to use an extended router to extend the wireless

network of the root router.

Note:

•

WDS bridging only requires configuration on the extended router.

1. Visit http://tplinkwifi.net, and log in to with the username and password you set for the router.

2. Configure the IP address of the router:

1 ) Go to

Downloaded from

www.Manualslib.com

Advanced

Restore advanced

Network

> LAN, configure the IP address of the extended router to be

in the same subnet with the root router; (For example, the IP address of the

root router is 192.168.0.1, the IP address of the extended router can be

192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.)

manuals search engine

settings, and click

to save the settings.

Table of Contents