Dhcp Clients List; Address Reservation - TP-Link MR5-WR542G User Manual

2880 minutes. The default value is 120 minutes.
Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the router, default
value is 192.168.1.1
Default Domain - (Optional.) Input the domain name of your network.
Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your ISP.
Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two
DNS servers.
Note: To use the DHCP server function of the router, you must configure all computers on the LAN as
"Obtain an IP Address automatically" mode. This function will take effect until the router reboots.

4.6.2 DHCP Clients List

This page shows Client Name, MAC Address, Assigned IP, and Lease Time for each DHCP Client
attached to the router (Figure 4-23):
Index - The index of the DHCP Client
Client Name - The name of the DHCP client
MAC Address - The MAC address of the DHCP client
Assigned IP - The IP address that the router has allocated to the DHCP client.
Lease Time - The time of the DHCP client leased. Before the time is up, DHCP client will request
to renew the lease automatically.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click on the Refresh button.

4.6.3 Address Reservation

When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP
address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to
servers that require permanent IP settings. This page is used for address reservation (shown in
Figure 4-24
).
MR5-WR542G
Figure 4-23 DHCP Clients List
37
54Mbps Wireless Router User Guide