Dhcp Clients List; Address Reservation - TP-Link TW-MR3220 User Manual

End IP Address - Specify an IP address for the DHCP Server to end with when assigning

IP addresses. 192.168.0.199 is the default end address.
Address Lease Time - The Address Lease Time is the amount of time a network user

will be allowed connection to the Router with their current dynamic IP Address. Enter the
amount of time in minutes and the user will be "leased" this dynamic IP Address. After the
time is up, the user will be automatically assigned a new dynamic IP address. The range
of the time is 1 ~ 2880 minutes. The default value is 120 minutes.
Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the

Router, default value is 192.168.0.1
Default Domain - (Optional.) Input the domain name of your network.

Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult

your ISP.
Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP

provides two DNS servers.

Note:
Only when the DHCP Server function of the Router is enabled, can all computers on the LAN
configured to be "Obtain an IP Address automatically" mode work properly.
4.7.2

DHCP Clients List

Choose menu "DHCP→DHCP Clients List", you can view the information about the clients
attached to the Router in the next screen (shown below
ID - The index of the DHCP Client

Client Name - The name of the DHCP client

MAC Address - The MAC address of the DHCP client

Assigned IP - The IP address that the Router has allocated to the DHCP client.

Lease Time - The time of the DHCP client leased. After the dynamic IP address has

expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the
current attached devices, click the Refresh button.
4.7.3

Address Reservation

Choose menu "DHCP→Address Reservation", you can view and add a reserved addresses
for clients via the next screen (shown below).When you specify a reserved IP address for a PC
on the LAN, that PC will always receive the same IP address each time when it accesses the
DHCP server. Reserved IP addresses should be assigned to the servers that require
permanent IP settings.
TL-MR3220 3G/4G Wireless N Router User Guide
.
)
-43-