NEC Express5800 Series User Manual page 97

Chapter 2 Preparations
1.12.4 Removal
To remove a riser card, reverse the installation procedure. Hold the card firmly and remove it. When
removing it, have another person hold the server so that the server does not move.
If needed, run SETUP utility, and then specify the boot order from the Boot menu. For details about the
Boot menu, refer to Chapter 2 (1. System BIOS) in "Maintenance Guide".
If using the server with the PCI card in slot #1A removed, attach the RAID card fixing bracket to the slot.
If using the server with the PCI card in slot #1B and/or #1C removed, attach the blank cover that comes
with the riser card to the slot.
Important
Support barWhen removing PCI board, be careful that the cables are not
caught with the support bar. Otherwise, PCI board might be damaged.
Support bar
Express5800/R120e-1E User's Guide
1. Installing Internal Optional Devices
97