NEC Express5800 Series User Manual page 30

Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 1 General Description
Enhanced Intel SpeedStep
Expandability
PCI Express 3.0 (x16 lanes): 1 slot (low profile)
PCI Express 2.0 (x4 lanes): 1 slot (low profile)
• PCI Express 3.0 (x8 lanes): 1 slot (dedicated to RAID Controller)
Large capacity memory of up to 384 GB *3
Can upgrade to multi-processor system with up to two processors
• 3.5-inch drive bay: 4 slots (3.5-inch Drive Model)
• 2.5-inch drive bay: 8 slots (2.5-inch Drive Model) *4
Optical disk drive bay provided as standard *5
USB2.0 interface
Five LAN ports (one for management LAN)
Ready to use
No cable connection is required to install a hard disk drive and additional power supply unit (hot swap
supported).
Sliding rails that allows easy installation.
Many built-in Features
Redundant power supply system supported (valid when optional power supply unit is installed)
El Torito Bootable CD-ROM (no emulation mode) format supported
Software power-off
Remote power-on feature
AC-Link feature
Remote console feature
Power switch mask
Connector for display unit provided on front panel
Baseboard Management Controller (BMC) conforming to IPMI v2.0
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D) utility
Easy setup
EXPRESSBUILDER (setup utility)
SETUP (BIOS setup utility)
Maintenance features
Off-line Tools
Memory dump feature using the DUMP switch
Feature to back up and restore BIOS/BMC settings using the EXPRESSSCOPE profile key
30
®
Technology supported
Express5800/R120e-1E User's Guide
3. Standard Features

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exp480aExpress5800/r120e-1e

Table of Contents