NEC Express5800 Series User Manual page 81

Chapter 2 Preparations
PCI Standard
PCI slot performance *1
Product
Socket type *2
number
Transfer bandwidth
Available card size
Product name
1000BASE-T Adapter (1ch)
N8104-138
[PCI Express 2.0(x1)]
N8104-132 1000BASE-T Adapter (2ch)
[PCI Express 2.0(x1)]
N8104-133 1000BASE-T Adapter (4ch)
[PCI Express 2.0(x4)]
N8104-145 1000BASE-T Adapter (2ch)
[PCI Express2.0(x4)]
N8104-128 10GBASE Adapter (SFP+/2ch)
[PCI Express 2.0(x8)]
N8104-131 10G Converged Network
Adapter (2ch) (10Gbps/Optical)
[PCI Express 2.0(x8)]
Infiniband connector board (FDR
N8104-146
1ch)
[PCI Express3.0 (x8)]
N8104-147 Infiniband connector board (FDR
2ch)
[PCI Express3.0 (x8)]
N8117-01A Additional RS-232C connector
kit *3
Installed as standard
*1 Data transfer rate of PCI slot = Transfer bandwidth × Number of lanes
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
* For details of functions of each card, refer to the technical guide.
* The card performance described in the parentheses after the Product name indicates the maximum operation performance of the
card.
* When the operation performance of a PCI board is higher than the PCI slot on the server, the PCI board operates with the
performance of the PCI slot on the server.
Slot number #1A
X8 lane
X8 sockett
(per lane) *1
Slot size
Dedicated to
RAID Controller
−
−
−
−
−
−
−
−
−
− Cannot be installed
Can be installed
Express5800/R120e-1E User's Guide
#1B #1C
PCIe 3.0 PCIe 2.0
X16 lane X4 lane
X16 socket X8 socket
8Gb/s 5Gb/s
Low profile
170mm max
1. Installing Internal Optional Devices
Remarks
For additional LAN port.
The card shape is [PCI Express
2.0(x4)]
For additional LAN port.
The card shape is [PCI Express
2.0(x4)]
For additional LAN port.
Jumbo frames are
supported.on Windows Server
2008 R2 and Redhat Enterprise
Linux operating systems.
Network cables with RJ-45 plug
covers cannot be used.
For additional LAN port.
For additional LAN port.
N8104-129 SFP+ Module is
required to connect with an
optical cable.
Up to 1 adapter is supported
when RHEL6 is installed.
For additional DCB/FcoE.
SFP module is factory-installed.
Pass redundancy of FC is
supported on
StoragePathSavior.
Teaming/bonding with LAN is
not available.
Use as LAN of N8104-131 is
only 1 port in 1 system.
Infinibandcontroller
Infiniband controller
For additional serial port B
(RS-232C)
Supports up to one adapter
81