NEC Express5800 Series User Manual page 135

Chapter 2 Preparations
Express5800/R120e-1E (2.5-inch Drive Model)
FRONT
REAR
4
Hub / switching hub
USB device
Finally, connect the power cord
to an outlet. *2
For connecting with UPS, refer
to the next section.
3 2 1
Ports for data
transmission
1000BASE-T
100BASE-TX
10BASE-T
*1 Either one can be connected.
*2 Connect the power cord to circuit breaker of up to 15 A.
Note
If you connect a card to a line, use the card which you have applied for with the
certification authority.
Tips
A leased line cannot be directly connected to the serial port connector.
Express5800/R120e-1E User's Guide
Display unit *1
Device with serial
interface
M
USB device
Hub / switching hub
2. Installation and Connection
Display unit *1
Management
LAN port
100BASE-TX
10BASE-T
135