NEC Express5800 Series User Manual page 77

Chapter 2 Preparations
9. Connect the cable of extra battery to RAID Controller.
When connecting the cable, orient the cable so that its marking will fit the connector.
10. Attach the RAID Controller to the rise card.
For how to install RAID Controller, refer to Chapter 2 (1.12 PCI Card).
11. Insert the riser card into the slot of the motherboard and fix the riser card with the screw which you
removed in step 5.
For how to install the riser card, refer to Chapter 2 (1.12 PCI Card).
12. Attach the duct which extra battery is installed.
Important
Support barRoute the cable so that it passes under the support bar.
Support bar
Express5800/R120e-1E User's Guide
1. Installing Internal Optional Devices
77