NEC Express5800 Series User Manual page 92

Chapter 2 Preparations
10. Install the controller bracket you have
removed in Step 8 to RAID Controller
with two screws you have removed in
Step 9.
11. Install a RAID Controller to the riser
card.
When installing the card, position the
terminal part of the PCI card to the
riser card slot and insert it.
12. Install a RAID Controller to the riser
card.
When installing the card, position the
terminal part of the PCI card to the
riser card slot and insert it.
92
Important
•
When connecting FBU control cable to RAID Controller and FBU, be
sure to mate the black marks on FBU control cable connector and on
RAID Controller connector. If the cable is connected conversely, the
component might be damaged.
•
When installing RAID Controller, route the cable (e.g., FBU control
cable and internal SAS/SATA cables) so that they pass under the
support bar.
Support bar
Express5800/R120e-1E User's Guide
1. Installing Internal Optional Devices
Black mark