4.3.4 Privacy Mask Tab
3) Enable the
check box.
2) Lay out masking
screens on the
areas to be
blocked from
surveillance.
1) Select a
masking shape
to block the
private area
you wish to
obstruct from
surveillance.
4) Click Save
button
The Privacy Mask tabbed pane allows you to mask or block private areas from
surveillance for privacy reason.
The steps to block a private area from surveillance:
1) Initially select the masking shape, e.g., "Line," "Rectangle," or "Ellipse" (see
figure above) you wish to use as screen to block the area from surveillance.
2) Click and drag the mouse cursor to lay out a masking screen on the area you
wish to block, and then release the mouse right button. Notice that the laid
out screen turns into phantom block.
iCAM-760D User's Manual
This is a "Line"
type.
ICP DAS
This is an "Ellipse"
type.
This is a "Rectangle"
type.
Chapter 4
Setup 66