Connecting Camera To Network - ICP DAS USA iCAM-771 User Manual

2.3 Connecting Camera to Network

1) Be sure that your PC or laptop has connected to your local Ethernet network.
2) Be sure that IP Camera has connected to your local networking via the LAN port
(RJ45) on the cable. For this PoE model, user can use PoE Switch as power supply.
3) Use CAM FINDER software utility in CD to set up the camera (see
Camera via CAM
browser using the following default IP information:
IP: 192.168.255.2
Submask: 255.255.0.0
Gateway address: 192.168.0.1
DNS Server address: 8.8.8.8
iCAM-771 User's Manual
iCAM-771
※ Please note that RJ45 network
plug to the PoE Port
cable has to
cable that with LED indicator
connect to incorrect
one may damage
camera hardware.
RJ45
②
FINDER), or directly set up the camera via the Microsoft IE
(Default Username/Password: admin/admin)
ICP DAS
,
PoE Switch
PC/Notebook
①
2.4 Configuring
16  Installation and Setup
Chapter 2