3) Once the masking screen is acceptable, click the Enable Privacy Mask
check box. If the laid out screen needs correction, click Delete button and
redo the masking screen lay out process.
4) Click the Save button. This will turn the laid out screen into solid block.
The steps to disable masking and remove the screen:
1) Click Delete button.
2) Click Save button and wait a while. Then the screen is permanently removed.
3) To permanently disable the Privacy Mask function, disable the Enable
Privacy Mask check box
iCAM-760D User's Manual
2. Then click the "Save" button and
wait the state finished.
ICP DAS
1. Please click "Delete" button.
Chapter 4
Setup 67