ICP DAS USA iCAM-771 User Manual page 44

Remote/Local Upgrade Firmware:
Backup:
Upload
Reboot
Restore
iCAM-760D User's Manual
※ Please specify the correct firmware version mapped with
your camera to upgrade, or there will be danger to damage
camera system.
Download the latest firmware file from the website. Follow the
steps:
1) Click the Browse button to access and select the
firmware file from its folder.
2) Click the Upgrade button. The Network Camera will then
start to upgrade the existing firmware.
When upgrade is completed, the Camera will reboot
automatically.
※ In
Appendix
guide you how to update camera firmware step by step.
Clicking the Backup button allows you to save Camera's
parameters and user settings into a
Setting: This function allows user to restore Camera's backup setting
by executing the below steps:
1) Click the Browse button to access and select saved
config_backup.tar.gz
2) Click the Restore button to process Camera configuration
restore.
System: Clicking the Reboot button allows you to manually reboot the
Network Camera.
System: Clicking the Factory Default button will restore the Network
Camera to its factory default settings status. Before Camera
system proceed to restore step, there'll be a dialog window
popped and then ask if you would like to keep "Network
setting" parameters. Besides, all configured data in the
"System Time", "Security" and "Maintenance" tab will be
remained current.
ICP DAS
Recommend to use the local upgrade.
chapter, there will be more detailed steps to
config_backup.tar.gz
file from the PC.
Chapter 4
appropriate
file.
Setup  44