EV Compensation:
Adjust the EV Compensation
value to 50.
Noise Reduction "2D/3D":
DPC (Dead Pixel Correction):
※ Note:
iCAM-760D User's Manual
Exposure Compensation is a feature of a camera that
allows you to adjust the exposure value manually. You may
increase or decrease the amount of brightness or darkness of your
picture through sliding the bar. Try to assign the fit value
according to the environment.
They are kinds of technology to provide clearer
video with less noise under poor lighting conditions, making it
easier to identify people or objects. Try to set them according to
the stream quality.
sensor real time and improves image quality. Here are three kinds
strength (Low Mid and High) to choose; try to set them according
to the pixel defective degree.
Both Noise Reduction and DPC are technologies to remove
noise; may result in blurriness and a loss of detail. Try to find
a level that makes the image look clean without losing too
much detail.
ICP DAS
Adjust the EV Compensation
value to 200.
This function could revises error pixels of the
Chapter 4
Setup 58