Table of Contents
Advertisement
Chapter 4
GPIO Input:
On the defined days of the week and at certain time of the set
days, the Camera will be triggered by its GPIO Input Signal when its
state changes.
(As for the more GPIO Signal setting, you may refer to
4.4.4 GPIO
Tab).
Each recording time-span is in accordance with the total value of
Pre-event recording and Post event recording (in seconds). And the
video record may be stored in the SD card, Remote Disk, provided to
host by E-mail/FTP, activated GPIO Output Port as selected or through
all of them.
Setup 75
iCAM-760D User's Manual
ICP DAS
Advertisement
Table of Contents
