Configuring Camera Via Cam Finder - ICP DAS USA iCAM-771 User Manual

2.4 Configuring Camera via CAM FINDER

The user can configure iCAM by default IP address or via the software utility.
The default IP Address configuring: see
The software utility CAM FINDER is in the attached Software Package CD.
The CAM FINDER is used to find and configure network cameras on the LAN.
This utility is useful for conveniently configuring the network settings of the
device, or for finding a device once the network settings have been modified.
The CAM FINDER programs are located in the Software iCAM CD provided
together with the device. Please insert the CD into the PC CD-ROM Drive, open
the folder "Software_Utility" and then "CAM FINDER". Launch the CAM
FINDER setup file "setup.exe" and complete the installation step by step.
iCAM CD Path: \Software_Utility\Cam Finder\
The latest version of the CAM FINDER software program is available on the
iCAM product website:
http://wise.icpdas.com/products/iCAM.html
Or directly download from the following FTP path:
http://ftp.icpdas.com/pub/cd/iCAM/Software_Utility/Cam Finder/
1. In order to ensure CAM FINDER utility has the best compatibility with
2. In order to ensure Camera will be assigned IP Address properly, please
iCAM-771 User's Manual
Camera, kindly please ask for distributor/dealer's help to get the latest
version downloading.
confirm the following things.
 Always consult your network administrator in order to avoid using a
previously assigned IP address.
 Check if the Camera is powered on and correctly connected to the
network.

In order to connect to the Web-based user interface of the camera, the
host PC must be in the same subnet. For more information about
subnets, please consult your network administrator.
ICP DAS
2.3 Connecting Camera to Network
NOTE
17  Installation and Setup
Chapter 2