ICP DAS USA iCAM-771 User Manual page 33

iCAM-771 User's Manual
Preset
Auto Patrol: While Preset Points are set, you could
※ Note that Auto Patrol function are
Zoom
ICP DAS
Point:
,
After panning and zooming, assign the
selected area a Preset Point
Save button to store the setting. The
pre-defined point of view areas will be
monitored in sequence. To cancel the
selection, click Remove
check
the camera view would automatically start to
go to the preset locations in sequence
(1->2->3->4) with the configured Time
Lapse value. Uncheck it, Auto Patrol
function would stop.
dependent with camera hardware also.
Means if camera hardware on your hand
isn't upgrade or supported these two
functions may not be visible to let you
choose.
Button: Click button to zoom-in and
button to zoom-out the selected scene. Zoom
setting is saved with the selected pre-defined
point of view area.
Camera Live View UI Settings  33
Chapter 3
,
(1 to 4) and click
button.
function to execute. Then