ICP DAS USA iCAM-771 User Manual page 79


Motion:
iCAM-760D User's Manual
This method will trigger the Camera snapshot operation according
to the set time interval (in seconds) whenever motion is detected
within the defined days of the week and at the time of the set days.
Single or 6 snapshots may be captured as defined. The stream of
accumulated snapshots may be stored in the SD Card, Remote Disk,
sent to host by E-mail、FTP, activated GPIO Output Port as
preferred or through all of them.
ICP DAS
User could select "Single
snapshot" or "6 snapshot..."
Chapter 4
Setup  79