ICP DAS USA iCAM-771 User Manual page 61

Below there are
parameters of Fisheye Lens.
Advanced Settings:
Day/Night Threshold:
Schedule:
iCAM-760D User's Manual
Advanced Settings
Set the illumination lux value (5 ~ 100) to auto-trigger
the Camera into "day" or "night" mode relative to luminance of
the area under surveillance. When the environment luminance
becomes higher than the set lux value, the Camera will auto switch
to "day" or "color" mode. Otherwise, it will remain at "night" or
"mono" mode.
Camera switches to Night or Mono mode.
Usually camera will switch to Day/Night mode automatically
according to the ambient light level detected by Light Sensor
component.
If camera is installed in too dark or too bright environment (Light
Sensor function is inactive), user could rely on this option to define
the start time to of Day/Night mode.
ICP DAS
adjustments, you could set image
Chapter 4
Setup  61