4.4.2 Video Tab
The Video tabbed pane sets the video recording trigger method, the four
methods available for selection are Schedule, Period, Motion is detected by the
Camera, and GPIO Input, each of which can be set up with user scheduled
recoding time and duration, as well as defining the video record file target
destination.
Schedule:
iCAM-760D User's Manual
This method activates the Camera video surveillance/recording
operation continuously when the defined days of the week and set
time of the set days are met. Motion is ignored with this method.
Each recording time-span is in accordance with the setting value of
Post event recording (in seconds) and the video record is stored in the
SD card, Remote Disk as selected or through both of them.
ICP DAS
Chapter 4
Setup 72