Machine Transport - Technogel Mixpasto 60 Use And Maintenance Instructions

Avoid wearing ties, necklaces or belts that might get tangled between moving parts; wear a protective
helmet in case of lifting and transporting.
•
When required, properly tie-up hair to avoid it getting tangled up between moving parts.
•
Do not remove the safety devices or accident-prevention protections.
•
Lift the machine and its components by carefully following the use and maintenance instructions, using an
adequate lifting mean with the utmost attention (for the weight, see paragraph 2.1 "Technical features").
•
Do not dismantle machine units or parts without express authorisation and training.
•
Make sure the used lifting means have an adequate capacity for the loads to be lifted and that they are in
good conditions (for the weight, see paragraph 2.1 "Technical features").
•
Do not dismantle machine units or parts without express authorisation and training.
•
Follow the environmental protection laws in force to dispose of the different packaging materials.
3.2

MACHINE TRANSPORT

ATTENTION
Purposely trained and authorised personnel must anchor the elements transported to the
transport mean.
WARNING:
The machine container must be protected during machine transport against atmospheric
agents using protective nylon to prevent water infiltrations and deposits on the elements in
question.
ATTENTION
The machine must be fastened to the platform or forklift truck forks using fastening
systems (belts or ropes) to avoid unbalances and falls.
The machine in question must be transported respecting the original packaging methods. It is necessary to
fasten the machine to the packaging sub-base (pallet with wooden crate) and protect the machine body
using the original packaging protections.
Where required, secure the machine container to the transport mean anchoring systems using belts with
adequate capacity to the weight to be secured.
The packaging is designed to perfectly protect the machine against impacts. Transport the packaged
machine as close as possible to the place of installation.
Insert the forks underneath the frame base of the machine where indicated to lift using forklift truck or
transpallet.
Pay the utmost attention in arranging the belts for lifting with crane or bridge-crane, in order to guarantee
machine stability during lifting; use belts with adequate capacity for insertion underneath the machine frame.
Pay proper attention in executing this operation to guarantee the required stability during machine handling.
THIS MANUAL IS THE PROPERTY OF
–
TECHNOGEL SpA
ALL REPRODUCTIONS, EVEN PARTIAL, ARE FORBIDDEN
8
Page 8 of 52